Helena Amphora Water Butt 300 Litre

Size – approximately 31½in (78cm) diameter at the widest point x 47in (120cm) high.  Capacity 300 litres (65 gallons).

Manufactured from robust PE polyethylene which is UV stabilised and weather resistant to last throughout the seasons. Please note – if temperatures fall below freezing you should drain the water butt.

Realistic terracotta effect finish for maximum versatility one side of the water butt has a smooth finish and the other side a more distressed, handmade finish. With a connection point on either side to fit the tap you can decide which side should be more visible in your garden.

Three brass connection points – two suitable to take a ¾in tap – one connection point near the base for easy drainage. All connection points are ¾in BSP brass threads. 

Supplied complete with ¾in brass tap – designed to be easily fitted into either the front or back brass threaded connection point. 

Supplied with wall fixing bracket and screws.

Child proof lid for maximum safety use the screw provided to fasten the lid in place via the hole beneath the rim of the ware butt. Simply remove the screw if you want to fill a watering can etc. by removing the water butt lid. Then secure back in place when finished.

We Recommend that if you want to connect this water butt to your house downpipe purchase the Guttermate Rain Diverter. You will need to drill the water tank when fixing this divertor or any other divertor you wish to use.

Despatched Direct From The Manufacturer :
Please allow 3 -5 days for delivery. 

Delivery:
Delivered direct from manufacturers please allow 3-5 days for delivery. When placing your order please inform us of any access restrictions to your property (i.e. narrow lane/road, stopping restrictions on the road etc.).
Couriers will leave goods in a safe place if you specify when placing your order where goods can be left e.g. “If I am out, leave it by the dustbins.”

Please Note:
Although we can delivery this item to Scotland, Highlands, Grampians, Northern Ireland and Offshore Island there will be an extra delivery charge. We will contact you after receiving your order to confirm the delivery charge prior to placing the order with the manufacturer.

Click here to see installation instructions for this water butt.