Palram Canopia Octave Greenhouse

Aluminium Frame – this sturdy, reinforced, rust-resistant aluminium frame features extra support beams for added strength. provides a highly durable and extra-rigid structure.

Crystal-clear Single Wall Polycarbonate Glazing – 0.7mm thick this provides over 90% light transmission. It is UV protected so will not discolour, fracture or shatter over time.

Galvanised Steel Base – this factory-made base will add structural stability to the greenhouse. This base can be anchored to a solid surface (such as concrete) using the pre-drilled holes in the base or it can be fitted to bare earth (fixings not included).

Easy Access – via low-threshold, large and high, double hinged doors. A lockable door handle allows for extra protection and safety (lock not included.)

Good Ventilation – two roof vents are included as standard, helping you regulate heat and humidity within the greenhouse. You could add an automatic opener to these (available to purchase separately) so that they open and close dependent on the temperature.

Built-in Gutter System – running down the length of the greenhouse, at the eaves, with gutter heads included to allow you to collect rainwater if required.

Dimensions :
Width – 8ft / 244cm
Length – 12ft / 367cm
Height To Eaves – 4ft 1in / 124cm
Height To Ridge – 7ft 6in / 229cm
Double Door – overall width 3ft 9in / 114.5cm x 6ft 4in / 192.5cm high

Self Assembly
This greenhouse is delivered flat packed for self-assembly. You will need a spirit level, tape measure, rubber mallet, drill, screwdriver, lubricant spray (such as WD40), spanner and step ladder during assembly

Delivery
Palram Canopia use a national carrier to deliver their door canopies. Please allow 5-7 working days for delivery.