Rowlinson Overlap Patio Chest

8mm Overlap Cladding – consisting of rough-cut boards that are overlapped to create the panels of the chest. This type of cladding is easier to manufacture so helps to keep the overall cost of the item down. All four sides of the store are supplied as complete panels ready to be joined together, helping reduce the time required for assembly.

Pressure Treated Against Rot – pressure treating the timber involves preservatives being forced into the timber rather than the preservative just being on the surface of the timber. As a result the timber has enhanced protection so will last longer than untreated timber.

OSB Floor Panel With Bearers – three bearers are supplied to attach to the underside of the floor panel.  It should be noted that this Patio Chest is designed to be stood on hard standing and is not to be stood on the ground. The hard standing must be free draining as it cannot be allowed in sit in pooled water during wet conditions.

OSB Roof Panel – supplied as one panel to form the complete roof. This is hinged at the back with large T-hinges. A stay bar is included to secure to the inside of the chest and provide a secure support to hold the lid open when required. A chain is included to be attached to the roof to prevent the lid from opening beyond the vertical position.

Mineral Roofing Felt – this traditional style roofing felt helps to waterproof the roof panels and protect your garden chest from the elements. It’s easy to install once you have the roof panel in place. It’s provided as one piece so there are no overlaps and is held in place using 13mm felt nails.

External Dimensions (including roof overhang):
Height At Back: 3ft / 92cm 
Width: 3ft 11 inches / 120cm 
Depth: 2ft 4½ inches / 72cm 

Internal Dimensions:
Width: 3ft 6 inches / 106.5cm 
Depth: 1ft 11 inches / 58cm
 
Footprint:
Width: 3ft 6 inches / 106.5cm
Depth: 1ft 11in /58cm.

Capacity: 460 Litres
 
Made in Britain. 

Self-Assembly
Supplied with comprehensive instructions, you will need the following tools during assembly: power drill / screwdriver, 3mm drill bit, cross head screwdriver bit, hammer, spirit level, sharp knife and tape measure. 

Despatched direct from the manufacturer please allow 7-10 working days for delivery.

Please allow 7-10 working days for delivery.  Rowlinson will send an email confirming your order, you will then receive a text (if a mobile number has been provided) to advise a delivery date and ETA this is usually 48 hours before delivery.  

 
The delivery charge is £5.99 for most mainland addresses, however the following postcodes may require an additional charge for delivery – we will contact you prior to processing your order if this is the case:
KA, FK, KY, DD, PA, AB, IV, PH, PL, TR, SA.
Unfortunately this item cannot be shipped to the following areas:
Northern Ireland, the Republic of Ireland, Guernsey, Isle Of Man, Jersey, Kirkwall, Shetlands, Outer Hebrides, Lerwick and the Isle of Wight.
 
Please Note : If you have ordered none ‘Manufacturer Despatch’ items as well as this product – these will be delivered separately.

Click Here to see instructions for assembling this chest.

As timber is a natural material, there are certain weather conditions that may affect the materials properties. In times of excessive dry spells, the material may lose some of its internal moisture causing a certain degree of shrinkage on a panel and in periods of excessive rain there will be a certain amount of swelling throughout the wooden panels. This process can not be avoided. If you have problems with certain boards shrinking in dry spells, try to decrease the amount of direct sunlight on the building or the amount of air passing over the building. During hot speels spray water directly onto the panels with the aid of a garden hose.